Specification
Understanding the structural capabilities of your insulated roof panels is essential for ensuring a durable, long-lasting installation. Below, you’ll find detailed span tables and specifications to help you select the right panel size for your project. For more details on our insulated roofing solutions, visit our Insulated Roof Panels page.
EPS Sandwich Panel
- 0.42mm steel top – available in Trim or Orb
- 0.6mm steel flat bottom
- Available in multiple colours
- 50mm – 200mm high density thickness available
- Cut to length (minimum length available 1800mm)
Single Span Table
| MM | KG/M2 | R Value @ 22.5C | Panel Coverage |
|---|---|---|---|
| 50 | 10.58 | 1.4 | 1000mm |
| 75 | 10.94 | 2.1 | |
| 100 | 11.17 | 2.7 | |
| 125 | 11.80 | 3.4 | |
| 150 | 12.23 | 4.1 | |
| 175 | 12.77 | 4.8 | |
| 200 | 13.31 | 5.4 |
| Wind Category | Panel Thickness | 3 Sides Open | 2 Sides Open | 1 Side Open | Fully Enclosed |
|---|---|---|---|---|---|
| N2 (W33) | 50 | 5400 | 5000 | 4500 | 4300 |
| 75 | 6500 | 5500 | 5000 | 4700 | |
| 100 | 7200 | 6200 | 5700 | 5500 | |
| N3 (W41) | 50 | 4800 | 3800 | 3300 | 3000 |
| 75 | 5500 | 4300 | 3900 | 3700 | |
| 100 | 6200 | 5000 | 4500 | 4300 | |
| N4 (W50) | 50 | 4000 | 3300 | 3000 | 3000 |
| 75 | 4600 | 3600 | 3400 | 3300 | |
| 100 | 5300 | 4100 | 3800 | 3500 |
Flashing Specification and Attachment
Easy Panel uses the below flashing attachments which are designed to provide a water tight connection around the panels.
Just like our panels, the flashings are very easy to maintain. Use a low pressure power washer, and if necessary, you can also use car wash soap or a 5% mild detergent to remove the tougher dirt and grime.
**All ‘D Measurements’ are dependent on the thickness of panel being used
Receiver Channel
Rollformed from 1.2BMT Surfmist Steel. Provides a water tight connection between an existing structure and the roof panels. Suitable for a fascia or wall mount.
Rear/Top Barge
Rollformed from 0.55BMT Colorbond Steel. Provides a water tight connection between the roof panels and flashing. Suitable for free standing or flyover structures.
Side Barge
Rollformed from 0.55BMT Colorbond Steel. Provides a water tight connection between the roof panels and flashing whilst creating a smooth, clean finish.
Fascia Flashing
Rollformed from 0.55BMT Colorbond Steel. Provides a water tight connection between the panels and guttering. Allowing water to flow off the panels and into the gutter.
